• Onion Skin Ampoule Filling Machine

Description

Onion Skin Ampoule Filling Machine built on principle of slant travel of ampoules while filling and sealing, to take care of vide variation of ampoule neck dimensions & thicknesses of available standard ampoules.

The Filling unit built on Stainless Steel Square pipe frame and totally encompassed with Stainless Steel coverings, in pleasing matt finish. Further, the large opening available at the bottom side for ease of absolute cleaning.

The pendant type electrical control panel is lifted from machine for ease of operation and safety.

Salient Features of Onion Skin Ampoule Filling Machine

  • Compact model.

  • All contact parts made from high quality Stainless Steel 316 & other Non-contact parts made from Stainless Steel 304.

  • “No Ampoule – No Filling” system.

  • Ampoule neck centering during gas flushing and filling operations.

  • Possibility of nitrogen gas flushing before, during and after filling.

  • Full accessibility allows easy maintenance.

  • Machine equipped with pre-warming station.

  • Minimum change over time, little maintenance & easy cleaning.

Process Operation of Onion Skin Ampoule Filling Machine

The sterilized ampoule tray directly loaded in to slant hopper of the unit. The Synchronized star wheel delivers ampoules, one by one on moving eccentric ampoule rack in single.

During the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating and final sealing is achieved.

Technical Specification of Onion Skin Ampoule Filling Machine

Model AFS-1 AFS-2 AFS-4 AFS-8
No. of Head Single Two Four Eight
Syringes One Double Four Eight
Ampoule Sizes 1 ml to 30 ml 1 ml to 30 ml 1 ml to 20 ml 1 ml to 20 ml
Filling Speed Up to 25 ampoules/minute Up to 50 ampoules/minute Up to 100 ampoules/minute Up to 200 ampoules/minute
Filling Precison ± 1% ± 1% ± 1% ± 1%
Filling Pump Piston Pump Piston Pump Piston Pump Piston Pump
Burner Gas LPG & Oxygen (O₂) LPG & Oxygen (O₂) LPG & Oxygen (O₂) LPG & Oxygen (O₂)
Nitrogen Arranegment Before & After Filling Before & After Filling Before & After Filling Before & After Filling
Number of Fill Nozzles One Two Four Eight
Number of Nitrogen Nozzles Two Four Eight Sixteen
Number of Sealing Burners Two Four Eight Sixteen
Power Required 0.5 H.P. 1 H.P. 1 H.P. 2 H.P.
Power Voltage 230 Volts, Single Phase, 50 Hertz, 4 Wire System 230 Volts, Single Phase, 50 Hertz, 4 Wire System 230 Volts, Single Phase, 50 Hertz, 4 Wire System 230 Volts, Single Phase, 50 Hertz, 4 Wire System
Contact Parts Made from Stainless Steel 316L Made from Stainless Steel 316L Made from Stainless Steel 316L Made from Stainless Steel 316L
Overall Dimension 915mm (L) x 610mm (W) x 965mm (H) approx. 915mm (L) x 760mm (W) x 965mm (H) approx. 1200mm (L) x 1070mm (W) x 965mm (H) approx. 2200mm (L) x 1400mm (W) x 1100mm (H) approx.

* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.